Send to Manufacturer
Thank you for your Design.
Send
Download Report
Download
Load Overrides
Enter in loads here to override wind speed or snow pressures. Leave values as blank if you want the load generator to auto calculate these values. Ticking the checkbox will apply the snow pressure directly, with no reduction factors applied.
SkyCiv Solar AutoDesigner
Fill out the fields below to design your own custom MT Solar Frame, complete with accurate engineering checks.
in
in
in
in
°
ft
in
Array Specification
| Product: | |
| SKU: | |
| Duty Classification: | |
| Module Width: | |
| Module Length: | |
| Number of Rows: | |
| Number of Columns: | |
| Total Number of Modules: | |
| Desired Tilt Angle: | |
| Front Edge Clearance: | |
| Total Array Height at Tilt: | |
| Total Frame Length: | |
| Frame Weight: | |
| Array Dimensions N/S: | |
| Array Dimensions E/W: | |
| Rail Length: | |
| Rail Check: |
Support Specifications
| Pole Size: | |
| Pole Length above Grade: | |
| Number of Poles: | |
| Pole Spacing: |
Foundation Specifications
| Foundation Type: | |
| Foundation Dimensions: | |
| Foundation Depth (below grade): | |
| Foundation Volume: | |
| Foundation Result: |
Design Disclaimer
This software should be used for preliminary designs and should not be used as a final design unless reviewed, verified and designed by a qualified structural engineer.